How do you install a trailer brake controller?

Wiring the 7-Way Trailer Connector and Brake ControllerRoute this wire to a 20-amp (or 30-amp) breaker under the hood and then to the positive post on the battery.There are now two wires connected to the positive post: the 12 volt hot lead and the brake controller power supply.NOTE: There will be excess wire after the 12 volt hot lead or brake wire connections have been made. …

How to install an electronic Trailer Brake Controller?

Mounting the Brake ControllerChoose an appropriate mounting location for the brake controller mounting bracket. …Using the screws provided, install the mounting bracket into the dash. …Secure the brake controller into the mounting bracket.The four wires on the brake controller will be connected shortly.

How do you install a brake controller?

Trailer Brake Controller Installation How-ToDisconnect the vehicle’s negative battery cableDetermine where to mount the controller on the dashDrill mounting holes for the bracketFasten the brake controller into placePlug in the brake controller with a custom wiring harness

Does our truck need a trailer brake controller?

What you really need is a brake controller, not trailer brakes. The controller will control the brakes that are already on your trailer. If your truck does not have an integrated controller then I would recommend a Tekohsha brand controller. If you are handy it can be a self install.